Project Calculators
Plan equipment, quantities, supplies, delivery and rental costs—all in one place.
- 12 free calculators
- No sign-up
- Print or share your results
Equipment Recommendation Tool
Tell us about your job and find suitable rental equipment.
Scaffold Quantity & Delivery Calculator
Plan scaffold groupings, quantities, rental duration and estimated cost.
General Delivery Estimator
Estimate delivery from our Mount Pearl location.
Driveway Sealer Calculator
Estimate sealer quantity, coverage and cost.
Generator-Sizing Calculator
Estimate generator capacity with reserve for your electrical load.
Temporary-Fence Calculator
Draw fence runs and estimate panels, bases, hardware and rental cost.
Heating / BTU Calculator
Estimate portable heater capacity for an enclosed space.
Floor-Sanding Supply Calculator
Estimate sanding grits, discs, screens and pads for your floor project.
Portable-Washroom Calculator
Estimate units and pumping frequency for your workforce or event.
MEWP Range-of-Motion Calculator
Compare working height, outreach and range for available boom lifts.
Wedge-Anchor Calculator
Estimate anchor length from embedment and the installation stack.
Rent-to-Own Calculator
Estimate rent credits, term and remaining buyout balance.
No calculator matches “”
Try a broader word like “power”, “fence” or “delivery”, or ask us directly—we’ll help you size the job.
Prefer to talk it through?
Our team plans jobs like yours every day. Call with your measurements and we’ll confirm quantities, delivery and pricing.
Equipment Recommendation Tool
Tell us about your job and find suitable rental equipment.
Need Help Finding The Equipment For Your Job?
Describe your job or pick a category. We’ll compare your needs with our current rental catalogue and show the best-fit machines, with rates.
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
Scaffold Quantity & Delivery Calculator
Plan scaffold groupings, quantities, rental duration and estimated cost.
S&S Supply · Scaffold rental planner
Scaffold Calculator
Tell us about your wall and we’ll work out the frames, braces and platforms you need, with a rental and delivery estimate. It takes about two minutes.
Design your scaffold
Enter your measurements. The drawing and equipment list update as you go.
Check your equipment list
We filled this in from your design. Change any quantity, or add extras like a wagon or bakers scaffold.
Rental period & delivery
How long you need it, and where it’s going.
How many days do you need it?
Delivery
Distance is measured by road from our yard at 1281 Topsail Road, Mount Pearl, NL A1N 5G3.
Your scaffold estimate
Print it, save it as a PDF, or send it to us for a firm quote.
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
General Delivery Estimator
Estimate delivery from our Mount Pearl location.
Delivery Cost Calculator
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
Driveway Sealer Calculator
Estimate sealer quantity, coverage and cost.
- Sealer
- $4.25 / litre
- Environmental fee
- $2.00 per order
- HST
- 15%
- Typical coverage
- 49–59 sq. ft. / litre
Measure your driveway
Quick start — pick a common size, then fine-tune:
What’s your budget?
How many litres?
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
Generator-Sizing Calculator
Estimate generator capacity with reserve for your electrical load.
Project Calculators
Generator Sizing Calculator
Tell us what you need to power and we’ll match it to the right rental generator — including motor start-up surge and safe reserve capacity.
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
Temporary-Fence Calculator
Draw fence runs and estimate panels, bases, hardware and rental cost.
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
Heating / BTU Calculator
Estimate portable heater capacity for an enclosed space.
Portable Heater BTU Calculator
Estimate the heater capacity required to heat an enclosed space.
Minimum calculated requirement
Recommended Heater Capacity
Calculation
Your Calculation
General-purpose heater sizing estimate only. Actual requirements can be affected by wind, infiltration, ventilation, open doors, frozen building materials, heater placement and construction stage. This tool is intended for portable/temporary heater selection and is not a CSA F280 heat-loss calculation for permanent HVAC design.
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
Floor-Sanding Supply Calculator
Estimate sanding grits, discs, screens and pads for your floor project.
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
Portable-Washroom Calculator
Estimate units and pumping frequency for your workforce or event.
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
MEWP Range-of-Motion Calculator
Compare working height, outreach and range for available boom lifts.
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
Wedge-Anchor Calculator
Estimate anchor length from embedment and the installation stack.
Wedge Anchor Sizing
Select the anchor diameter and enter the thickness of the material being fastened.
2-1/4" embedment + 1/2" material + 1/2" nut = 3-1/4"
Installation Stack
Side view • measurements shown outside the assembly
Important — Disclaimer & Limitation of Liability
This calculator is provided for general informational and product-sizing assistance only. It calculates anchor length using the selected anchor diameter, stated minimum embedment depth, material or fixture thickness, and an allowance for nut thickness. It does not calculate or verify structural capacity, pull-out resistance, shear capacity, concrete capacity, edge-distance requirements, anchor spacing, seismic suitability, installation torque, substrate condition, or suitability for any particular application.
The user is solely responsible for determining that the selected anchor type, diameter, length, quantity, location and installation method are suitable for the intended application and comply with applicable project specifications, manufacturer instructions, building codes, engineering requirements and local regulations. Where an engineered connection or life-safety application is involved, selection and installation should be verified by an appropriately qualified professional.
By using this calculator, the user acknowledges that results are estimates for sizing assistance and agrees that S&S Supply Ltd. and its affiliates, employees and representatives are not responsible for losses, damages, injuries, installation failures or other consequences arising from reliance on the calculator or improper selection or installation of an anchor, to the fullest extent permitted by applicable law.
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
Rent-to-Own Calculator
Estimate rent credits, term and remaining buyout balance.
Rent-to-Own · 28-day billing periods
Equipment Rent-to-Own Calculator
See when you’ll own the equipment, what it costs in total, and your buyout balance at any point in the agreement.
You own the equipment after
— rental periods
- Total rent-to-own price
- —
- Cost to rent-to-own
- —
- Original purchase price
- —
- Rent credit per period
- —
- Net amount to recover
- — Price less option fee
- Residual payment
- — Due at buyout
Where your money goes
Buy out early
Slide to see what it would take to own the equipment after any period.
- Rent paid so far
- —
- Credit earned
- —
- Buyout balance due
- —
- Total cost if you buy then
- —
Rent-to-own schedule
Balance after each completed 28-day rental period.
| Period | Period ends | Rent paid | Rent credit | Cumulative credit | Total paid to date | Buyout balance |
|---|---|---|---|---|---|---|
| Calculating… | ||||||
Results are estimates for planning purposes only and are not an offer or agreement. Amounts exclude HST. Final rent-to-own terms, eligible equipment, delivery and other charges are confirmed in your written rental agreement.
Estimates are for planning purposes only and must be verified before ordering. You are responsible for confirming suitability, codes and local OHS requirements. Prices, availability and specifications can change without notice.
